EnGenius ECB9500 Manual de usuario descargar pdf (Pagina 36)

Multi-Function Gigabit Wireless-N Client Bridge Version 2.0

• Radio: Choose to Enable or Disable the wireless radio.

•

Mode

: This drop-down list is fixed to WDS as this is the Wireless Distribution operating mode.

•

Band: Select the IEEE 802.11 mode from the drop-down list. For example, if you are

sure that the wireless network will be using only IEEE 802.11g clients, then it is

recommended to select 802.11g only instead of 2.4 GHz B+G which will reduce the

performance of the wireless network. You may also select 802.11B+G+N. If all of the

wireless devices you want to connect with this router can connect in the same

transmission mode, you can improve performance slightly by choosing the

appropriate "Only" mode. If you have some devices that use a different transmission

mode, choose the appropriate "Mixed" mode.

 Channel: Select a channel from the drop-down list. The channels available are

based on the country’s regulation. A wireless network uses specific channels in the

wireless spectrum to handle communication between clients. Some channels in your

area may have interference from other electronic devices. Choose the clearest

channel to help optimize the performance and coverage of your wireless network.

•

MAC Address #: Specify the MAC address (BSSID) of up to four devices within the

WDS.

 Set Security: Setting data encryption type. (See 3.2.4.2.4.2 to 3.2.4.2.4.4)

 Click on the Apply button to save the changes.

3.2.4.4.3 Advanced

 Click on Advanced link under the Wireless drop-down menu. This page allows you

to configure the fragmentation threshold, RTS threshold, beacon period, transmit

power, DTIM Period, etc.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 63 64

Sin comentarios

EnGenius ECB9500 Manual de usuario Pagina 36