EnGenius ESR-1221 EXT Manual de usuario descargar pdf (Pagina 27)

 WAN Access Type: Select PPTP from the drop-down list. This type of connection is

used when your ISP has provided you a dedicated IP address.

 IP Address: Enter an IP address for this device, which is assigned by your ISP.

 Subnet Mask: Enter the subnet mask for this IP address, which is assigned by your

ISP.

 Default Gateway: Enter the IP address of the default gateway, which is assigned by

your ISP.

 MTU: You may adjust the Maximum Transmit Unit (MTU), however it is recommend

that this value is set to the default: 1500 bytes

 DNS 1-3: Specify the IP address of the DNS server

 Clone MAC Address: Specify a MAC address if you would like to use a different

MAC address on this device. (optional)

 Enable uPNP: Place a check in this box to enable UPnP. It is recommended to

enable this feature as it’s used by several applications.

 Enable PING Access on WAN: Place a check in this box if you would like the device

to be pinged from the WAN side (ISP).

 Enable Web Sever Access on WAN: Place a check in this box if the static IP

address if used for a web-server.

 Enable IPsec pass through on VPN connection: Place a check in this box to

enable the pass through of IPsec packets on a VPN connection.

 Enable IPsec pass through on VPN connection: Place a check in this box to

enable the pass through of PPTP packets on a VPN connection.

 Enable IPsec pass through on VPN connection: Place a check in this box to

enable the pass through of L2TP packets on a VPN connection.

 Click on the Apply Changesto save the changes.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 46 47

Sin comentarios

EnGenius ESR-1221 EXT Manual de usuario Pagina 27