EnGenius ECB9500 Manual de usuario descargar pdf (Pagina 58)

Multi-Function Gigabit Wireless-N Client Bridge Version 1.0

3.3.3.3 WAN – PPPoE

 The WAN interface can be configured as PPPoE. This type of connection is usually

used for a DSL service and requires a username and password to connect.

 Login Method: Select PPPoE from the drop-down list.

 Login: Specify the user name which is provided by your ISP.

 Password: Specify the password which is provided by your ISP, and then verify it

once again in the next field.

 Service Name: Specify the name of the ISP.

 MTU: The Maximum Transmission Unit (MTU) is a parameter that determines the

largest packet size (in bytes) that the router will send to the WAN. If LAN devices

send larger packets, the router will break them into smaller packets. Ideally, you

should set this to match the MTU of the connection to your ISP. Typical values are

1500 bytes for an Ethernet connection and 1492 bytes for a PPPoE connection. If the

router's MTU is set too high, packets will be fragmented downstream. If the router's

MTU is set too low, the router will fragment packets unnecessarily and in extreme

cases may be unable to establish some connections. In either case, network

performance can suffer.

 Type: Select a reconnection time: Keep Connection (A connection to the Internet is

always maintained), Automatic Connection (A connection to the Internet is made

as needed), Manual Connection: You have to open up the Web-based

management interface and click the Connect button manually any time that you wish

to connect to the Internet.

 Idle Time: Specify the maximum idle time before the device dimes out. If Keep

Connection is selected as the connection type, then this field is not required.

 MAC Address: If you need to change the MAC address of the router’s WAN-side

Ethernet interface, either type in an alternate MAC address (for example, the MAC

address of the router initially connected to the ISP) or click on Clone Your PCs MAC

Address.(This is not on the page)

 Click on the Apply button to save the changes.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 70 71

Sin comentarios

EnGenius ECB9500 Manual de usuario Pagina 58