EnGenius ENSTATION2 Especificaciones descargar pdf (Pagina 20)

2-3

NSTALLATION

ALL

OUNTING

THE

EVICE

Plug the other end of the Ethernet cable into the PoE port

of the PoE injector.

Figure 2-1: Installing the EnStation2

Turn over the EnStation2. Then insert the pole mounting

strap through the middle hole of the EnStation2. Use a

screwdriver to unlock the pole-mounting ring putting it

through the EnStation2.

Mount the EnStation2 securely to the pole by locking the

strap tightly.

Wall Mounting the Device

A. Plug the dynamic stick into the bracket.

B. Combine the sealing nut with the assembled kit and

tighten it.

C. Put the mock washer on the dynamic stick.

D. Assemble the mounting kit with the CPE.

E. Drill the holes 1.04"/26 mm holes and input the mounting

screws.

F. Use the included screws to attach the mounting screws.

G. Use the hole of the bracket to aim for the screws on the

wall. Hang and re-adjust the device as necessary.

Figure 2-2: Wall Mounting the Device

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 97 98

Sin comentarios

EnGenius ENSTATION2 Especificaciones Pagina 20